D-Link DGE 528T - Network adapter - PCI - EN, Fast EN, Gigabit EN - 10Base-T, 100Base-TX, 1000Base-T
Shipping Destinations for this item
Capable of running at full-duplex Gigabit speed, this card gives your PC 2000Mbps data transmission on your existing Cat. 5 twisted-pair network cable. As an inexpensive alternative solution to fiber-optic, the card allows you to instantly upgrade to Gigabit without requiring you to install new, expensive fiber cables. The card supports 10/100/1000Mbps network speed auto-sensing and full/half duplex auto-negotiation.
The card provides on-board screening of VLANs Tagged Ethernet frames, allowing your PC to be configured with VLAN-supported switch. Your PC can be part of a VLAN network, where domains are segmented up to enhance performance and security.
Wake-On-LAN (WOL) is an Advanced Configuration Power Interface (ACPI) function allowing a powered OFF computer to be powered ON from a remote station. This function allows the administrator to send wake-up signals to a computer. The WOL function provides a great utility for power management of the PC and allows users to initiate action at irregular times and from distant locations.
The card's embedded flow control and independent FIFO provide a means to protect against possible data loss during transmission on the network. When connected to a Gigabit switch supporting flow control, the card receives signals from the switch regarding buffer overrun during peak usage periods. The card then delays transmission until the switch is ready again to accept new data.
Using a single chip solution, this card is very small in size and consumes very little power of your computer system.
|Device Type:||Network adapter|
|Form Factor:||Plug-in card|
|Interface (Bus) Type:||PCI|
|PCI Specification Revision:||PCI 2.2|
|Cabling Type:||Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T|
|Data Link Protocol:||Ethernet, Fast Ethernet, Gigabit Ethernet|
|Data Transfer Rate:||1 Gbps|
|Status Indicators:||Link activity, port transmission speed, port duplex mode|
|Features:||Flow control, full duplex capability, auto-sensing per device, auto-negotiation, VLAN support, wake on LAN (WOL), auto-uplink (auto MDI/MDI-X)|
|Compliant Standards:||IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.3x|
Expansion / Connectivity
|Interfaces:||1 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45|
|Compatible Slots:||1 x PCI|
|Compliant Standards:||Plug and Play, ACPI 2.0, FCC Class B certified, CE, VCCI Class B ITE|
Software / System Requirements
|OS Required:||Microsoft Windows NT 4.0, Novell NetWare 5.x, Apple MacOS X, Novell NetWare 6.x, Linux 2.2.x, Linux 2.4.x, Microsoft Windows 98/ME/2000/XP|
|Peripheral / Interface Devices:||PCI slot|
|Min Operating Temperature:||0 °C|
|Max Operating Temperature:||50 °C|
|Humidity Range Operating:||10 - 90%|