D-Link DWL-P200 - Power injector + PoE splitter - AC 100-240 V

£40.09 includes FREE UK Postage (other delivery options available)

Shipping Destinations for this item

UK - Shipping Included
United Kingdom
Europe Zone 1 - £2.99
Austria, Belgium, Denmark, France, Germany, Ireland, Luxembourg, Netherlands, Switzerland
Europe Zone 2 - £2.99
Andorra, Croatia, Czech Republic, Finland, Liechtenstein, Monaco, Norway, Poland, Sweden
Europe Zone 3 - £3.49
Bulgaria, Cyprus, Estonia, Faroe Islands, Gibraltar, Greece, Greenland, Hungary, Iceland, Italy, Latvia, Lithuania, Malta, Montenegro, Portugal, Romania, San Marino, Serbia, Slovakia, Slovenia, Spain, Vatican City
North America - £4.99
Canada, USA
Australia and Far East Asia - £5.99
Australia, Israel, New Zealand, Taiwan
Japan - £6.99
Japan
Others - £8.99
Falkland Islands

RRP £0.00

Sorry, this product is currently unavailable.

The DWL-P200 Power Over Ethernet (PoE) adapter kit is designed to supply operational power to surveillance cameras and wireless LAN devices such as access points, bridges and routers. It enables power current to travel on the Ethernet network cable. The DWL-P200 supports both 5VDC and 12VDC power requirements. Power requirement can be selected through a DIP switch.
On a standard UTP Category 5 cable, only two pairs (pins 1, 2, 3 and 6) are used for Ethernet data transfer. Power Over Ethernet is designed to take advantage of the unused pins of the remaining pair of cable wires. Consequently, a single Category 5 cable will now carry both Ethernet data and DC power. The idea is to supply the remote end with power and the requirements of Ethernet connectivity via a single Cat 5 cable.
The DWL-P200 includes a base unit and a terminal unit. At one end, the base unit inserts DC voltage into the unused wires (pins 4, 5, 7 and 8) of the network cable. At the other end, the terminal unit splits the data and DC power apart. Data signals continue to travel on remaining network cables, while DC power is fed into the power adapter, which connects to an AC power outlet.

General

Device Type: Power injector + PoE splitter
Width: 5.2 cm
Depth: 8.1 cm
Height: 2.8 cm
 

Power Device

Input Voltage: AC 100-240 V
Frequency Required: 50/60 Hz
Output Voltage: +5, +12 V
Output connector(s): Power DC jack
 

Expansion / Connectivity

Interfaces: 1 x network - Ethernet - RJ-45
 

Miscellaneous

Compliant Standards: FCC Class B certified, CE, C-Tick
 

Environmental Parameters

Min Operating Temperature: 0 °C
Max Operating Temperature: 40 °C
Min Storage Temperature: -40 °C
Max Storage Temperature: 70 °C
Humidity Range Operating: 10 - 80%
Humidity Range Storage: 5 - 90%
 

For more information and our Delivery Policy see here.


For more information and our Returns Policy see here.

Catalogue No: DWL-P200