Kingston HyperX Genesis 4GB 1600MHz DDR3-SDRAM Non-ECC CL9 Unbuffered Memory Modules (Kit of 2)

£39.99 includes FREE UK Postage (other delivery options available)

Shipping Destinations for this item

UK - Shipping Included
United Kingdom
Europe Zone 1 - £1.29
Austria, Belgium, Denmark, France, Germany, Ireland, Luxembourg, Netherlands, Switzerland
Europe Zone 2 - £1.49
Andorra, Croatia, Czech Republic, Finland, Liechtenstein, Monaco, Norway, Poland, Sweden
Europe Zone 3 - £1.79
Bulgaria, Cyprus, Estonia, Faroe Islands, Gibraltar, Greece, Greenland, Hungary, Iceland, Italy, Latvia, Lithuania, Malta, Montenegro, Portugal, Romania, San Marino, Serbia, Slovakia, Slovenia, Spain, Vatican City
North America - £1.49
Canada, USA
Australia and Far East Asia - £1.49
Australia, Israel, New Zealand, Taiwan
Japan - £1.49
Japan
Others - £1.79
Falkland Islands

RRP £0.00

Sorry, this product is currently unavailable.

General

Marketing

DDR3 is the third generation of Double Data Rate (DDR) SDRAM memory. Similar to DDR2, it is a continuing evolution of DDR memory technology that delivers higher speeds (up to 1600 MHz), lower power consumption and heat dissipation. It is an ideal memory solution for bandwidth hungry systems equipped with dual and quad core processors and the lower power consumption is a perfect match for both server and mobile platforms. Dual In-line Memory Modules, or DIMMs, closely resemble SIMMs. Like SIMMs, most DIMMs install vertically into expansion sockets. The principal difference between the two is that on a SIMM, pins on opposite sides of the board are tied together to form one electrical contact; on a DIMM, opposing pins remain electrically isolated to form two separate contacts.

Warranty

Lifetime

Memory

Memory Size

4096MB (2 module(s) x 2048MB)

Memory Type

DDR3

Memory Speed

1600MHz

Memory Package

DIMM

Designation

PC3-12800

Pin Configuration

240 pins

Slot

240-Pin (x2) DIMM

Data Width

64bit

Bus I/O Configuration

Unbuffered

Voltage

1.9V

Error Correction

Non ECC

CAS Latency

CL9

Memory Latency

9-9-9-27

Connector Material

Gold

Module Configuration

256M x 64

Features

  • JEDEC standard 1.5V ± 0.075V Power Supply
  • VDDQ = 1.5V ± 0.075V
  • 533MHz fCK for 1066Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 6,7,8,9,10
  • Posted CAS
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • Programmable CAS Write Latency(CWL) = 7(DDR3-1066)
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
  • Bi-directional Differential Data Strobe
  • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE . 95°C
  • Asynchronous Reset
  • 1066Mbps CL7 doesn’t have backward compatibility with 800Mbps CL5
  • PCB Height: 1.180 inch (30.00mm), double sided component


For more information and our Delivery Policy see here.


For more information and our Returns Policy see here.

Catalogue No: EL-00001164