Kingston ValueRAM 4GB (1x4GB) DDR3 1333MHz ECC 240-pin DIMM Memory Module with Thermal Sensor

£37.09 includes FREE UK Postage (other delivery options available)

Shipping Destinations for this item

UK - Shipping Included
United Kingdom
Europe Zone 1 - £2.19
Austria, Belgium, Denmark, France, Germany, Ireland, Luxembourg, Netherlands, Switzerland
Europe Zone 2 - £2.29
Andorra, Croatia, Czech Republic, Finland, Liechtenstein, Monaco, Norway, Poland, Sweden
Europe Zone 3 - £2.49
Bulgaria, Cyprus, Estonia, Faroe Islands, Gibraltar, Greece, Greenland, Hungary, Iceland, Italy, Latvia, Lithuania, Malta, Montenegro, Portugal, Romania, San Marino, Serbia, Slovakia, Slovenia, Spain, Vatican City
North America - £3.99
Canada, USA
Australia and Far East Asia - £3.99
Australia, Israel, New Zealand, Taiwan
Japan - £4.99
Japan
Others - £6.99
Falkland Islands

RRP £0.00

Sorry, this product is currently unavailable.

General

Marketing

This document describes ValueRAM's 512M x 72-bit (4GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), registered w/ parity, 1Rx4 ECC memory module, based on eighteen 512M x 4-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9. This 240-pin DIMM uses gold contact fingers.

Warranty

Lifetime

Memory

Memory Size

4096MB (1 module(s) x 4096MB)

Memory Type

DDR3

Memory Speed

1333MHz

Memory Package

DIMM

Pin Configuration

240 pins

Error Correction

ECC

CAS Latency

CL9

Connector Material

Gold

Module Configuration

512Mx72

Electrical

Voltage

1.5V

Environmental

Operating Temperature

0 to 85?C

Non Operating Temperature

-55 to +100?C

Features

  • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
  • VDDQ = 1.5V (1.425V ~ 1.575V)
  • 667MHz fCK for 1333Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 9, 8, 7, 6
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address ?000? only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
  • Bi-directional Differential Data Strobe
  • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ? 1%)
  • On Die Termination using ODT pin
  • On-DIMM thermal sensor (Grade B)
  • Average Refresh Period 7.8us at lower than TCASE 85?C, 3.9us at 85?C < TCASE < 95?C
  • Asynchronous Reset
  • PCB : Height 1.180' (30.00mm), double sided component


For more information and our Delivery Policy see here.


For more information and our Returns Policy see here.

Catalogue No: EL-22200049