Kingston ValueRAM 8GB (1x8GB) Memory Module 1333MHz DDR3 ECC 240-pin DIMM

£39.79 includes FREE UK Postage (other delivery options available)

Shipping Destinations for this item

UK - Shipping Included
United Kingdom
Europe Zone 1 - £1.29
Austria, Belgium, Denmark, France, Germany, Ireland, Luxembourg, Netherlands, Switzerland
Europe Zone 2 - £1.49
Andorra, Croatia, Czech Republic, Finland, Liechtenstein, Monaco, Norway, Poland, Sweden
Europe Zone 3 - £1.79
Bulgaria, Cyprus, Estonia, Faroe Islands, Gibraltar, Greece, Greenland, Hungary, Iceland, Italy, Latvia, Lithuania, Malta, Montenegro, Portugal, Romania, San Marino, Serbia, Slovakia, Slovenia, Spain, Vatican City
North America - £1.49
Canada, USA
Australia and Far East Asia - £1.49
Australia, Israel, New Zealand, Taiwan
Japan - £1.49
Others - £1.79
Falkland Islands

RRP £0.00

Sorry, this product is currently unavailable.



This document describes ValueRAM's 1G x 72-bit (8GB) DDR3- 1333 CL9 SDRAM (Synchronous DRAM), 2Rx8, ECC memory module, based on eighteen 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3- 1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers.






Memory Size

8192MB (1 module(s) x 8192MB)

Memory Type


Memory Speed


Memory Package


Pin Configuration

240 pins

Bus I/O Configuration


Error Correction


CAS Latency


Connector Material



Operating Temperature

0 to 85?C

Non Operating Temperature

-55 to +100?C


  • JEDEC standard 1.5V (1.425V ~ 1.575V) Power Supply
  • VDDQ = 1.5V (1.425V ~ 1.575V)
  • 667MHz fCK for 1333Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 9, 8, 7, 6
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address ?000? only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
  • Bi-directional Differential Data Strobe
  • Thermal Sensor Grade B
  • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ? 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower than TCASE 85?C, 3.9us at 85?C < TCASE < 95?
  • Asynchronous Reset
  • PCB Height: 1.18' (30mm), single sided component

For more information and our Delivery Policy see here.

For more information and our Returns Policy see here.

Catalogue No: EL-23200108