Linksys Wireless-G Access Point with Power Over Ethernet and RangeBooster (UK)

£99.39 includes FREE UK Postage (other delivery options available)

Shipping Destinations for this item

UK - Shipping Included
United Kingdom
Europe Zone 1 - £3.49
Austria, Belgium, Denmark, France, Germany, Ireland, Luxembourg, Netherlands, Switzerland
Europe Zone 2 - £3.49
Andorra, Croatia, Czech Republic, Finland, Liechtenstein, Monaco, Norway, Poland, Sweden
Europe Zone 3 - £4.99
Bulgaria, Cyprus, Estonia, Faroe Islands, Gibraltar, Greece, Greenland, Hungary, Iceland, Italy, Latvia, Lithuania, Malta, Montenegro, Portugal, Romania, San Marino, Serbia, Slovakia, Slovenia, Spain, Vatican City
North America - £6.99
Canada, USA
Australia and Far East Asia - £12.99
Australia, Israel, New Zealand, Taiwan
Japan - £12.99
Japan
Others - £12.99
Falkland Islands

RRP £0.00

Sorry, this product is currently unavailable.

General

Marketing

RangeBooster technology is a compatible add-on to standard Wireless-G which increases your wireless network's range up to two times, and its throughput by up to 35%. Unlike ordinary wireless technologies that are confused by signal reflections, RangeBooster uses two smart receivers at each end to detect and decode reflected signals at distances where standard technologies give up. You'll find that dead spots in the wireless coverage area are reduced, too. The Linksys WAP200 Access Point lets you connect Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so you can add PCs to the network with no cabling hassle. Power over Ethernet support makes it easy to install - you can mount the Access Point anywhere, even without ready access to a power plug. With appropriate Power Over Ethernet support at the other end, you only need to run one cable to the Access Point to deliver both data and power. Of course, you can also use the included AC adapter if your installation point has power available nearby.

Description

The Advanced security features makes this solution ideal for your Business. Advanced wireless security using Wi-Fi Protected Access (WPA2 Enterprise) with up to 256-bit encryption, and the new Wireless Security Monitoring functionality gives your business the visibility and protection it needs. Used when Linksys 200-Series Wireless Adapters are present, the Wireless Security Monitoring functionality alerts you of possible wireless intruders, vulnerabilities in the wireless deployment, and visibility into Denial of Service attacks. Moreover, the integrated QoS features provide consistent voice and video quality on both the wired and wireless networks, enabling the deployment of business qualilty VoIP and video applications. Additional features like Multiple BSSIDs, Wireless Roaming, Auto-channel selection, and Load Balancing, make this solution ideal for your Business.

Network

Independent Channels

11 North America, 13 Most of Europe (ETSI and Japan)

Wireless LAN

Transmit Power

11 to 18dBm

Encryption

64bit/128bit WEP • WPA-PSK • WPA2-PSK • WPA-ENT • WPA2-ENT

Receive Sensitivity

11.g: 54Mbps@ -72dBm • 11.b: 11Mbps@ -85dBM

Antenna Type

2 x 2dBi omni detachable Antenna

System

Management

SNMP Version 1, 2c, 3 • Event Logging: E-mail Notification • Remote Syslog • Web Firmware Upgradable Through Web-Browser • Diags: Flash, RAM, LAN, WLAN • DHCP Client

Security

Access Control: Wireless Connection Control: MAC-Based • SSID Broadcast Enable/Disable • IEEE 802.1X support • Wireless Client Isolation • Wireless Security Monitor

System Requirements

Operating Systems Supported

Linux

System Requirements

802.11b, 802.11g Wireless Adaptor With TCP/IP Protocol Installed Per PC • Switch/Router with Power Over Ethernet (PoE) Support Or PoE Injector when used with PoE • Web-Based Configuration Java-Enabled Web Browser

Compliance

Standards

IEEE802.11g • IEEE802.11b • IEEE802.3 • IEEE802.3u • IEEE802.3af (Power Over Ethernet) • 802.1p (QoS priority) • 802.1q (VLAN) • 802.1X (Security Authentication) • 802.11i - Ready (Security WPA2) • 802.11e - Ready (Wireless QoS) • 802.11F (Wireless Roaming)

Certifications

FCC • ICES-003 • CE

Electrical

Power Adaptor Output Voltage

12VDC

Environmental

Environmental

Operating Temperature 0 to 40°C - Humidity 10 to 85%

Physical

LED Status Indicators

Power • POE • Wireless • Ethernet

In The Box

Wireless-G Access Point with Power Over Ethernet and RangeBooster • 2 x SMA detachable Dipole antenna • User Guide on CD-ROM • Ethernet Network Cable • Power Adaptor • Product Stands • Registration Card

Dimensions

19.5cm (D) x 20.5cm (H) - Weight 0.4kg

Features

  • Standards-based POE (IEEE 802.3af) or External DC power
  • Support for WMM provides improved QoS over wireless connections for better video and voice performance
  • RangeBooster technology for up to twice the range, reduced dead spots, and up to 35% more throughput than standard Wireless-G
  • Advanced wireless security using Wi-Fi Protected Access (WPA2) with up to 256-bit encryption, and new Security Monitoring Feature gives your business the visibility and protection it needs


For more information and our Delivery Policy see here.


For more information and our Returns Policy see here.

Catalogue No: EL-00004276