Netgear Prosafe Stackable Smart Switch 24x 10/100 + 4 Gigabit Ports

£194.29 includes FREE UK Postage (other delivery options available)

Shipping Destinations for this item

UK - Shipping Included
United Kingdom
Europe Zone 1 - £2.19
Austria, Belgium, Denmark, France, Germany, Ireland, Luxembourg, Netherlands, Switzerland
Europe Zone 2 - £2.29
Andorra, Croatia, Czech Republic, Finland, Liechtenstein, Monaco, Norway, Poland, Sweden
Europe Zone 3 - £2.49
Bulgaria, Cyprus, Estonia, Faroe Islands, Gibraltar, Greece, Greenland, Hungary, Iceland, Italy, Latvia, Lithuania, Malta, Montenegro, Portugal, Romania, San Marino, Serbia, Slovakia, Slovenia, Spain, Vatican City
North America - £3.99
Canada, USA
Australia and Far East Asia - £3.99
Australia, Israel, New Zealand, Taiwan
Japan - £4.99
Japan
Others - £6.99
Falkland Islands

RRP £0.00

Sorry, this product is currently unavailable.

General

Marketing

NETGEAR expands its line of award-winning ProSafe Smart Switches with a suite of 10/100 Stackable Smart Switches. The ProSafe Stackable Smart Switches adds the flexibility of economical, modular growth paired with a more robust management feature set and still gives you the ease of use and affordability you expect from ProSafe Smart Switches. With options of 24 or 48 10/100 ports, both of the Stackable Smart Switches offer 4 Gigabit Ethernet ports for high speed connectivity. Two of the Gigabit Ethernet ports offer the option of fibre connectivity via Small Form-factor Pluggable (SFP) GBIC (Use with AGM731F ProSafe 1000BASE-SX SFP GBIC, AGM732F ProSafe 1000BASE-LX SFP GBIC, or AGM733 ProSafe 1000BASE-LZ SFP GBIC module)slots for long distance links. NETGEAR's ProSafe FS728TS and FS752TS deliver performance and scalability through a 4Gbps, dual-ring, resilient stacking architecture with the ability to mix and match to stack up to six units or 192 10/100 ports-and manage them all at a single IP address! The non-blocking design of the switches deliver simultaneous, full wire-speed, low-latency throughput to all ports. Shipped ready to go straight out of the box, they deliver switching that's easy to set up, stack-up and use.

Description

The popular intuitive, Web-browser interface offers the Smart Switch management, making it a snap to monitor stack performance, configure ports, even set up port trunks, VLANs, and traffic prioritization. In addition, the ProSafe Stackable Smart Switches expand on the current ProSafe Smart Switch feature set by adding 801.x security, SNMP v2c and v3 support, logging, rate limiting and Layer 3 prioritization. NETGEAR's ProSafe Stackable Smart Switches are value-packed switches targeted at the demands of growing businesses for a network infrastructure solution that delivers performance, scalability, ease-of-use, and affordability.

Warranty

NETGEAR 5-year warranty.

Memory

Buffer Memory

0.125MB

Performance

Backplane

12.8Gbps

MAC Addresses

8000

Mean Time Between Failure (MTBF)

100,000 Hours

Interfaces/Ports

Fixed Ports

24 10/100 Mbps auto sensing switching ports • 4 Built-in RJ-45 Gigabit Ethernet 24 port(s) x 10/100

Uplink Ports

Auto Uplink on all ports 4 port(s) x 1000

GBIC Slots

2 x SFP

Compliance

Standards Compliance

IEEE 802.3 10BASE-T• IEEE 802.3u 100BASE-TX • IEEE 802.3ab 1000BASE-T • IEEE 802.3z 1000BASE-X • IEEE 802.3x full-duplex flow control

System

Management Capabilities

Administrative Switch Management: IEEE 802.1Q Static VLAN (Up to 128) • IEEE 802.1p Class of Service (CoS) • Port-based QoS • IEEE802.3ad (manual) Link Aggregation • IEEE 802.1D Spanning Tree Protocol • SNMP v1, v2c, v3 • RFC 1213 MIB II • RFC 1643 Ethernet Interface MIB • RFC 1493 Bridge MIB • RFC 2131 DHCP client • IEEE 802.1x • Port-based security by locked MAC addresses • Storm control for broadcast, multicast and unknown unicast packets • Port-based ingress/egress rate limiting • SNTP • RMON group 1, 2, 3, 9 • Private Enterprise MIB • Port Mirroring Support • Web-based configuration • Configuration Backup/Restore • Password Access Control • Firmware upgradeable

Certifications

Electromagnetic Compliance: CE mark, commercial, FCC Part 15 Class A, VCCI Class A, EN 55022 (CISPR 22), EN 55024 (CISPR 24), C-Tick. Safety: CE mark, commercial • CUL 60950 (Listed)/ EN60950 (Low Voltage Directive)

Electrical

Voltage/Power/Frequency

100 to 240VAC / 15W / 50 to 60Hz

Power over Ethernet (PoE)

No

Environmental

Environmental

Operating Temperature 0 to 50°C - Humidity 0 to 90%

Physical

In The Box

FS728TS ProSafe 24 port Stackable Smart Switch with 4 Gigabit Ports • Rubber footpads • Power cord • Rack-mount kit • Resource CD Installation Guide • Warranty/Support information card

LED Status Indicators

Unit: Power, Master, Stack ID • Per Port: Link, Speed, Activity • Per Gigabit Port: Link, Speed, Activity, Stack

Dimensions

44.0cm (W) x 20.5cm (D) x 4.3cm (H) - Weight 2.6kg

Features

  • Stack up to 6 units & manage them all from one IP address
  • Combines Fast and Gigabit Connectivity with option to use
  • 2 x GBIC slots for high speed, long distance fiber connections
  • Supports v1, v2c & v3 SNMP Network Management Protocol
  • Support for Port Trunking, Port Configuration & Prioritisation
  • Also supports 802.1x security, rate limiting & Layer 3 prioritisation
  • Easy browser-based switch management
  • Auto-sensing ports auto sense the right network speed
  • Auto Uplink technology auto adjusts for different Ethernet cable types
  • Housed in a durable 17 metal box & includes rack mount kit


For more information and our Delivery Policy see here.


For more information and our Returns Policy see here.

Catalogue No: EL-00009931